Sending USDT comes down to three things: the receiver's address, the network that address belongs to, and a small test before the full amount. Open your wallet or exchange, choose USDT, tap send or withdraw, paste the address, pick the same network the receiver uses, check the fee and confirm. The transfer usually arrives in seconds to a few minutes, and it cannot be reversed.
This guide shows how to send USDT from a Philippine exchange, a self-custody wallet and Telegram, how to keep fees down, and what to do if a transfer goes wrong. Whether you are sending to your Nanay's wallet in Iloilo or moving USDT into GCrypto to cash out, the rules are the same.
Before you send: the three checks
- Get the address from the receiver, fresh. Ask them to copy it from their wallet's receive screen and send it by a channel you trust. Don't reuse an address from an old chat thread.
- Confirm the network by name. "USDT" is not enough. Ask "TRC20, TON, BEP20 or ERC20?" and make sure the network you choose on your side matches exactly.
- Send a test. Send 5 to 10 USDT first. Once the receiver confirms it arrived, send the balance.
How to send USDT from an exchange
The flow is similar on Coins.ph, PDAX, GCrypto in GCash or any other exchange. Wording changes, the logic doesn't.
- Go to your USDT balance and tap Send, Withdraw or Transfer out.
- Choose on-chain withdrawal (not an internal transfer to another user of the same app, unless that is what you want).
- Paste the address and select the network. Many apps let you add the address to an allowlist; do it for addresses you use often.
- Enter the amount. The exchange's withdrawal fee is usually deducted from it, so the receiver gets slightly less. Some exchanges also set a minimum withdrawal per network.
- Confirm with 2FA or OTP. Never share this code with anyone, including people claiming to be support.
- Copy the transaction hash (TxID). It is your proof of sending and lets the receiver track it.
Exchanges sometimes hold the first withdrawal to a new address for a short security review. That is normal on regulated platforms. If you are sending from an offshore exchange, remember the SEC has flagged several of them as unregistered, and some are blocked in the Philippines; keeping large balances there adds risk you don't need.
What exchanges actually charge
When you withdraw from an exchange, you don't pay the network directly. You pay the exchange's flat fee for that network, which it sets and changes from time to time. Readings from the public fee schedules of several large exchanges give a sense of the spread:
| Network | Typical exchange withdrawal fee |
|---|---|
| TRC20 (Tron) | about 1 to 2 USDT |
| TON | about 0.15 to 0.5 USDT |
| Solana | about 0.3 to 1.5 USDT |
| BEP20 (BNB Chain) | about 0.01 to 1 USDT |
| ERC20 (Ethereum) | about 0.3 to 5.5 USDT |
On a 50 USDT padala, a 2 USDT fee is 4% of the amount, which is more than many remittance services charge. On 1,000 USDT it is a rounding error. So for small, frequent transfers, the network choice matters a lot; for large, occasional ones, reliability and support at the receiving end matter more.
How to send USDT from a self-custody wallet
In a self-custody wallet like Trust Wallet, Tonkeeper or a hardware wallet, you control the keys, so you pay the network fee directly in that network's own coin:
| Network | Fee is paid in | Typical raw network cost | Settles in |
|---|---|---|---|
| TRC20 (Tron) | TRX (energy and bandwidth) | about $2, or about $4 to an empty address | about 1 min |
| TON | Toncoin (TON) | under $0.01 | seconds |
| BEP20 (BNB Chain) | BNB | under $0.01 | seconds |
| ERC20 (Ethereum) | ETH | about $0.01 when quiet, $3 or more when busy | a few minutes |
| Solana | SOL | well under $0.01, plus about $0.13 for a new token account | seconds |
Two details catch people out. On Tron, sending to an address that has never held USDT costs roughly double, because the network has to create a new storage slot for it. On Solana, the first USDT sent to a fresh wallet needs a small refundable deposit to open a token account. Neither is a scam; both are just how the networks work.
The most common beginner problem is having USDT but no gas coin. A wallet holding 200 USDT on Tron and zero TRX cannot send anything. Keep a small balance of the network's native coin, or use a wallet that offers to pay the fee in USDT.
USDT network fee calculator
Cheapest for you| Network | Typical fee | Monthly cost |
|---|
Typical on-chain costs for a standard USDT transfer from a self-custody wallet. Exchange withdrawal fees are set by each platform and are often a flat 0.5–10 USDT. Estimates only. Real costs depend on the app, network congestion and the moment you transact.
Which network should you use?
The cheapest network is only right if the receiver supports it. A quick rule of thumb for Philippine users:
- Sending to an exchange or GCrypto: use exactly what their deposit page lists. TRC20 is the most widely accepted, but check.
- Sending to family who use Telegram: TON is cheap and fast, and they can receive in a wallet inside Telegram. More in USDT on TON.
- Sending to a MetaMask-style wallet: a low-fee EVM network keeps costs to cents. Note that USDT on BNB Chain (BEP20) is a bridged version, not one Tether issues directly, so some platforms treat it differently.
- Not sure: our network quiz below suggests a fit, and TRC20 explained covers the most common choice.
Which USDT network should I use?
Also fine:
Always confirm the receiver supports the same network. Sending on the wrong network can mean losing the funds.
Also fine
Reading a USDT address correctly
Different networks use different address formats, which is a handy sanity check:
- TRC20 addresses start with T and are 34 characters long.
- EVM networks (ERC20, BEP20, Polygon, Arbitrum) start with 0x followed by 40 characters. The same address is valid on all of them, which is why picking the network matters so much.
- TON addresses are 48 characters and usually start with UQ or EQ.
- Solana addresses are 32 to 44 characters with no fixed prefix.
If you are unsure, paste the address into our free USDT address checker, or read the wallet address guide.
Need USDT to send?
Buying from a regulated exchange is the simplest way to start, with clear records for every transfer.
Operating since 2013 and registered with FinCEN (US) and the FCA (UK); readers in the Philippines are served by its international entity. Check availability and local rules before you sign up.
Worked example: sending 300 USDT home for tuition
Rosa works in Hong Kong and wants to send 300 USDT to her brother in Cebu, who will cash it out in GCash. Her brother opens GCrypto, copies his USDT deposit address and tells her the network shown on the screen.
- Rosa sends 10 USDT as a test from her exchange. The exchange charges a flat withdrawal fee, deducted from the amount.
- Her brother sees it land within minutes and confirms by chat.
- Rosa sends the remaining 290 USDT and shares the TxID.
- Her brother sells in GCrypto. After two small withdrawal fees, about 298 USDT has arrived. At an illustrative ₱62.50 per USDT, that becomes roughly ₱18,625 in his GCash.
The extra test fee cost Rosa a little, but it removed the chance of an ₱18,000 mistake. For the full cash-out walkthrough, see USDT to GCash, and for regular family support, the OFW remittance guide.
Sending to a person vs sending to an exchange
To a person's own wallet, the address is theirs alone. No memo, no minimum, and the funds are available the moment the network confirms. The risk is on their side: if they lose their recovery phrase, nobody can help.
To an exchange or GCrypto, the address belongs to the platform. It may use a memo, it may wait for a number of confirmations before crediting (Ethereum deposits can take noticeably longer than Tron or TON), and large or unusual deposits can trigger a compliance check. Platforms licensed by the BSP must also screen where funds come from, so USDT that passed through a flagged address can be held for questions.
Can sent USDT be frozen?
Yes. Tether's contracts on major networks let it blacklist an address, after which that address can no longer move its USDT. Tether says it has frozen more than $4.9 billion in total, mostly at the request of law enforcement in fraud, hacking and sanctions cases. For ordinary users this cuts both ways: scam victims who report quickly sometimes get funds back, but accepting USDT from a stranger whose coins are tainted can drag you into an investigation. Another reason to send and receive only with people and platforms you know. Our is USDT safe guide explains freezes in more detail.
If something goes wrong
The receiver says nothing arrived. Paste the TxID into the network's block explorer. If it shows confirmed to the right address, the issue is on the receiving side; ask them to refresh or contact their platform. If it shows pending, wait.
You sent on the wrong network. Contact the receiving exchange's support with the TxID. Recovery is sometimes possible, but not guaranteed and rarely quick. For your own wallet on EVM networks, add that network in the wallet app and the funds should appear; you will need a little gas there to move them.
You sent to a wrong address. If it belongs to an exchange, explain to their support and provide proof. If it is a random private address, the funds are almost certainly lost.
Someone offers to "recover" your USDT for a fee. That is a scam. Read our USDT scams guide before replying to anyone.
Sending habits worth keeping
- Save trusted addresses in an allowlist or address book, labelled clearly.
- Never send to an address you got from a stranger promising returns or a "release fee".
- Keep TxIDs and screenshots of large transfers for your records and possible tax questions.
- Double-check the network every single time, even with addresses you've used before; a receiver can change platforms.




